Zalman Z12 is the successor hilarious Zalman Z11 cabinets, cabinet is designed with an emphasis on cooling performance components. The front of the cabinet is fitted with a dust filter panel is perforated to improve cold air. For improved cooling can be fitted with three additional 120mm fan, the other two are already supplied with the cabinet. In total therefore, you can have five, which undoubtedly ensure adequate air flow. The source is placed at the bottom of the cabinet, because cold air is sucked underside of the cabinet, which increases lamp life and reduces its heat and noise.
On the upper side there is a pair of USB 3.0 ports and outlets of the fans. Another pair of USB connectors can be found in the front, this time in version 2.0. Tweens are 3.5 mm jack for headphones and one for microphone.
Cabling is facilitated several holes for threading the cable assembly is then further simplified bezešroubovým mount hard drives over the rubber pads. In the back of the find and hose grommets for water cooling to an external radiator. Users often changing processor certainly appreciate opening for easy removal of the back-plate under the plate.
|| Separate cooling source reduces temperature and increases its life |
| Up to five 120mm fan ensures the smooth flow of air
|| Designated graphics card with a length of 290 mm can accommodate even the largest dual cards |
| It is interesting to SSD disk on the back of the motherboard mounting plate
Midi Tower Color:
Format motherboard ATX, mATX, MITX
4 x external 5.25 "bays
5x internal 3.5 "bays
1x internal 2.5 "bays
1x universal position 2.5 "/ 3.5"/5.25 "
Front panel connector 2x USB 2.0, 2x USB 3.0, Headphone, Microphone
Other equipment Cable management, dust filters, Support SSD (2.5 "), screw less installation, transparent sides Cooling:
The capacity for 5 x 120mm fans Design:
Dimensions 215 x 470 x 480 mm
Weight 7 kg