I start at large. Protective films are two basic types - soft and hard. This film belongs to the soft (if carelessly pulling for her, so he pulls out), and it is necessary to stick to wet, not to make bubbles. Hard films (eg cell, rather than a film, I would say thin plastic film, do not pull it) can stick dry without bubbles (because the display sit down sequentially) and easier with them, putting them in place without umatlání because it keeps its shape. Films are soft to the touch gumovější and what I could with this particular register, and does not produce a completely smooth surface will remain light waves, which make but do not produce as much glare. Hard films, I had always been a mirror smooth, but unfortunately also quite prone to reflections (typically even more than the actual display glass). Now to the product: The quality of the film itself will probably be okay, display sensitivity remained the same color and brightness as well without significant deterioration. However the film I could not satisfactorily stick, so after two days I could not stand to look at it and pulled it (I am a perfectionist). Another reason was removing the phone to me then fit into a magnetic docking station (which does have a second larger exchange bed for the phone in the case, but it would probably - I did not try - again too large). The biggest problem in sticking it to me paltry application solution, which does not actually his job. When you hold hints of the instructions, "the more, the better", so a solution to make the film great drops that run off, and the film remains dry. If you put a light dusting (about three puffs on the film), it's probably better, but bubbles are formed. Anyway, no matter how much you want a solution, the film is very fast and catches the surface thanks to its softness with her very badly strefuje place. Before you manage to correctly catch the beginning, you have the rest of the film is dry and desktop displays some challenged the dust. Pros sticking stickers on Jarově water and has a good reason - Jarově water forms a thin continuous film, after which the film prior to expelling fluid glides beautifully and did not catch the ground. I tried this method reapplied removing the foil and it went by itself, but because of the dusty and ošmakanému adhesive film did not catch it entirely (maybe I had too much concentrated soapsuds). Unfortunately, I can unequivocally say that the new film on Jarově sufficiently water grab, I tried it, so decide for yourself whether willing to risk all bundled application solution. I'd have gone into it and I tried jar. Now I have a hard road but on the film, so I'll try that and see.
glazed estimate is too good resistance to scratches
rubber and slightly sticky to the touch problematic application (if it be nice), accompanied by a solution - rather JAROV water
Translated by Google Translate