|Price incl. VAT||£8.23 £7.79|
|Price excl. VAT||£6.49|
USB 3.0 adapter AXAGON ADSA-FP2 FASTport2 SATA 6G interface designed to connect a 2.5 "SATA HDD or SSD. Fast SATA 6G interface and support UASP significantly increases transmission speeds and the adapter is thus well suited for SSDs. Electronics adapter supports reading SMART information monitoring condition attached disks.
Handy tool FASTport 2 connects to a computer quickly and easily any 2.5 "SATA hard drive or SSD.
Copes with all SATA, SATA II and SATA III 2.5 "disks without limitation the maximum capacity.
Ideal tool for data migration.
ANY 2.5 "HDD / SSD • ANY CAPACITY • DATA MIGRATION
USB 3.0 interface ensures seamless high-speed connections to all current computers.
Current SATA III / 6G interface with support UASP allow you to use your speed modern SSDs.
• USB 3.0, SATA 6G • UASP
Reading SMART monitoring condition information attached disks.
Support suspend connected drives and the adapter.
The "boot" your computer from the HDD / SSD connected via adapter FASTport second
HDD SMART INFO • AUTO SPIN DOWN • BOOT SUPPORT
Automatic installation can handle a total outsider. Drivers are included with the operating system and installed automatically.
USB cord tightly for direct computer connection is always readily at hand and not get lost.
Power adapter with 2.5 "HDD / SSD via USB bus without external power.
AUTO INSTALL • FIXED USB ??CABLE • USB POWER
Clean, minimalist design and slim, lightweight body.
Subtly lit blue LED indicates power and data transfer.
PURE DESIGN • SLIM CASE • DELICATE BLUE LED
1x USB 3.0
Ports: 1x SATA 6G
Size: 2.5 "HDD, SSD
After USB bus
Compatible with USB 3.0, backward compatible with USB 2.0.
Support transmission speeds of 12/480/5000 Mbit / s (full / high / super speed).
Support 2.5 "SATA III / II / I drives without limitation of the maximum capacity.
Complies with Serial ATA 3.1 specification (SATA / 600), transmission speed up to 6 Gb / s.
Complies with Serial ATA 2.0 specification (SATA / 300), transmission speeds up to 3 Gb / s (300 MB / s).
Complies with Serial ATA 1.0 specification (SATA / 150), transmission speeds up to 1.5 Gb / s (150 MB / s).
Overall throughput / bit rate adapter is determined by the used USB 3.0 (theor. 5 Gbit / s).
Support UASP (USB Attached SCSI Protocol).
Support for booting from the SSD / HDD connected via USB adapter.
Support HDD hitchhiking - suspend connected drives when idle.
Possibility to connect the device in operation thanks to the support Hot Plug.
Full support for plug and play.
Direct connection via USB 3.0 Type A male connector on a 12 cm long cable attached to an adapter.
Power and indications:
Power over USB 3.0 bus up to 900 mA from the USB port of a fully sufficient in all cases.
Subtly glowing blue LED that indicates USB power (continuous light) and data transmission (flashing).
The dimensions of the adapter 71 x 46 x 14.3 mm, weight of the adapter only 37 g incl. USB cable.
Supported operating systems:
MS Windows XP / Vista / 7/8/10 and later, Windows Server 2003/2008/2012 and newer (support for all 32- and 64-bit versions of Windows), Mac OS X 10.x and above, Linux 2.6 kernel. x higher.
Note .: The drivers are part of the supported operating systems and installed automatically. No other driver installation is needed and are not available.
USB 3.0 - SATA 6G adapter incl. USB 3.0 cable length of 12 cm.
Specifications can be changed without notice. Images are for illustrative purposes only. Retail Price (MSRP) means the manufacturer's/supplier's suggested retail price.
Link to Manufacturer's Website: Enter link to the external review