|Price incl. VAT||£25.81|
|Price excl. VAT||£21.51|
|Return products within two months £1.30 Possibility to return products within two months||
USB 2.0 Active Extension Cable AXAGON ADR-220 a length of 20 meters. The active portion of the cable - repeater amplifies the signal through USB and allows to connect USB devices much farther than the usual 5 meters using passive cables. The total length of the USB route with the combination of 20 m extension cords and other cables USB cabling system, active AXAGON to 50 meters.
The great advantage of extension cords ADR-220 is integrated auxiliary power connector This means you can connect to long distance and equipment with more energy consumption. In most cases it is sufficient to power the USB bus, but for devices with larger orders may be at greater distances USB power and lack of additional power from the network may need to fix the problem.
Exceptionally compact body repeater allows seamless AXAGON use in electrical installation rails or cable systems. Use high quality shielded cable for high speed communications and minimal side interference.
Active USB AM/AF Extension Repeater Cable
Length of cable:
1x USB 2.0
Fully compatible with USB 2.0 and backwards compatible with USB 1.1
Supporting transfer rates 1.5/12/480 Mbit/s (low/full/high speed).
Full support Plug and Play and Hot Plug.
Two LEDs indicate power connection and connect the USB device located on both the active parts of the product.
Power cables and devices for USB bus (bus-power mode 5V - 500 mA).
For most connected USB device is USB bus power after sufficient and does not need additional power supply.
The active portion includes a connector cable (O 3.5 x 1.3 mm outer diameter x inner) for the auxiliary power 5V/1-2A.
Recommended additional power adapter AC-AXAGON 5V2A (not included).
For longer routes with multiple USB repeater cables connected in series can be has power over the USB bus and the lack of it can strengthen the rights of auxiliary power repeater cable.
For more information:
Dimensions active part with USB type A female connector 65 x 22 x 13 mm, USB cable length of 20 m, with USB type A male connector. The second active portion of the middle cord ADR-220 (75 x 22 x 13 mm) to ensure quality of the output signal to the USB end of a long line.
Cable weight 782 g
Supported operating systems:
MS Windows XP/Vista/7/8/8.1 and later, Windows Server 2003/2008/2012 and newer (all supported 32 - and 64-bit versions of Windows), Mac OS 8.6 and higher, Linux kernel 2.4.x and higher.
Note: Drivers are part of the supported operating systems and will be installed automatically. No other driver installation is needed and are not available.
USB active repeater cable length of 20 m and a quick installation guide.
Specifications can be changed without notice. Images are for illustrative purposes only. Retail Price (MSRP) means the manufacturer's/supplier's suggested retail price.
Link to Manufacturer's Website: Enter link to the external review