Select the item on the page that has the error
We use cookies to give you the best possible experience on our site. By continuing to use the site you agree to our use of cookies. Find out more

ARCTIC Accelero Mono PLUS

ARCTIC Accelero Mono PLUS - Cooler
Cooler - active + passive for VGA, 120mm fan, 136x138x51mm
Code:  CB176m Product Number:  DCACO-V430001-BL
Helpdesk Print
Compare alternatives



The ARCTIC RC RAM features cooling four pieces of passive aluminum chips in DDR2 or DDR3 chips to help achieve better overclocking  results...

for Memory
Sapphire Nitro Gear LED FAN red

Players are constantly increasing their demands on the specifications of components for their computer configurations. They want their...

ARCTIC Accelero L2 Plus

ARCTIC Accelero L2 Plus will provide, the same as its predecessor Pro, efficient and extremely quiet cooling with all ATI/AMD and NVIDIA mainstream graphics cards...

Sapphire Nitro Gear LED FAN blue

Gamers are constantly increasing their demands on the components in their computers, wanting to differentiate their device from others, wanting something...

ARCTIC Accelero Xtreme IV

ARCTIC Accelero Xtreme IV offers efficient and extremely quiet cooling with all mainstream graphics cards from AMD and NVIDIA. Compared to standard factory coolers...

Sapphire Nitro Gear LED FAN white

Gamers are constantly increasing their demands on the components in their computers, wanting to differentiate their device from others, wanting something...

Rated by 31 users
5 22x
4 6x
3 2x
2 0x
1 1x
90 % Customers Recommend

ARCTIC Accelero Mono PLUS

The ARCTIC Accelero Mono PLUS GPU cooler is equipped with a universal mounting mechanism that makes it easy to fit on a variety of graphics cards. It can efficiently remove up to 200W of residual heat , equipped with a 120mm fan with PWM speed control and five heatpipes to provide quick and efficient heat dissipation from the GPU.

Improved RAM and VR cooling capabilities
Accelero Mono PLUS is supplied with two G-1 Heat Glue bags to help you fix the RAM and VR modules. Its main advantage is excellent thermal conductivity and zero electrical power for ten years of life. What's more, removal of G-1 adhesive is just as easy as removing ordinary heat conductive tape.

Almost inaudible
Thanks to the low noise rotor and its enclosure in the patented system, the noise generated by the fan rotation is almost eliminated. Accelero Mono PLUS is barely audible even at full load. If you want to set a specific noise and rotation speed, you can still customize the PWM speed control as required (here).

Parameters and Specifications:

Heat removal capability: up to 200W
Ribbing: 43x aluminum rib, thickness 0.4mm
Heat Pipe: 5x 6mm (diameter)
Dimensions: 136x138x51mm (LxWxH)
Net weight: 348g

Diameter: 120mm
Speed: 400-1500 rpm./Min. (PWM regulation)
Bearings: Dynamic fluid
Sound level: 0.4 Sone
Current / Voltage: 0.08A - 0.13A, 4.2 - 12.0V

Compatible AMD / ATI Radeon:
Series 6000: 6950, 6870, 6850, 6790, 6770, 6750
Series 5000: 5870, 5850, 5830, 5770, 5750
Series 4000: 4890, 4870, 4850, 4830, 4770
Series 3000: 3870, 3850
Series 2000: 2600 XT
Series 1000: 1950 XTX, 1950 XT, 1950 XT, 1900 XT, 1900 XT, 1900 XT, 1900 XT, 1800 XT, 1800 XT, 1800 XT, 1800 XT, 1600 XT, 1600 XT, 1300 Pro, 1300

Compatible NVIDIA:
GTX Series: 560Ti, 560, 550Ti, 550, 465, 460 SE, 460
GTS Series: 450, 250, 240 (OEM), 150 (OEM)
GT series: 340, 330, 320, 130 (OEM)
Series 9000: 9800 GTX +, 9800 GTX, 9800 GT, 9600 GT, 9600 GSO 512, 9600 GSO
Series 8000: 8800 GTX (G80), 8800 GTS 512 (G92), 8800 GTS (G92), 8800 GTS (G80), 8800 GT, 8800 GS (9600GSO)
Series 7000: 7950 GT, 7900 GTX, 7900 GT, 7900 GS, 7800 GTX 512, 7800 GTX, 7800 GT
Series 6000: 6800 XT AGP, 6800 XT, 6800 Ultra, 6800 Ultra, 6800 GT, 6800 GT, 6800 GS AGP, 6800 GS, 6800 AGP, 6600 GT, 6600 GT, 6600 GT 6600 GT 6600

Coolers: 26 pcs
Screw (M2): 4 pcs
Washer: 4 pcs
Spacer (2.0mm): 4 pcs
Spacer (4.0mm): 4 pcs
G-1 heat conductive adhesive (2.0 g gray paste): 1 bag
G-1 heat conductive adhesive (2.0 g white paste): 1 bag
Mixing rod: 1 pc
4-pin fan power adapter: 1 pc
VGA bracket: 1 pc
Mounting plate: 2 pcs

13.6 cm Done!
13.8 cm Done!
5.1 cm Done!
By air Done!
Maximum speed
1,500 RPM Done!
Speeds control
Automatic speed control Done!
Active Done!
More Specifications

This product is not an independently functional unit and may require professional installation.

Online chat

Dear customer, your question you can send us a message via the contact form here, respectively. you can solve your query online using chat. If you want to use the chat log , please.

Specifications can be changed without notice. Images are for illustrative purposes only. Retail Price (MSRP) means the manufacturer's/supplier's suggested retail price.

There are no posts in this discussion.
Rated by 31 users
5 22x
4 6x
3 2x
2 0x
1 1x
90 % Customers Recommend
Uzivatel 21/09/2013
Translated by Google Translate

I used this cooling card Nvidia GTX465 and is very quiet and more efficient than the original cooler. Before gluing liabilities should be very thoroughly cleanse the cooled isopropilem and adhesives used very little (so that you glue well kept and when gluing / pressing the deficit to a component spilled into PCB)
Very quiet efficiency in high-quality processing contains everything needed to assemble a good price Bonding liabilities for long and if you've never sticking these coolers so I believe that there grumble :-)
Radim, Praha 9 14/03/2012
Translated by Google Translate

This cooler completely fulfilled my expectations. On my GTX560 runs at 40% at max. Power and cool it uchladí and yet it can not be heard
One big fan -> silent operation Simple installation
Tomas 03/03/2014
Translated by Google Translate

very good cooler from about 75-85 degrees to a whopping 52 degrees +, - 2stupne and it is stable in the raids on najvecsich rozliseniach, very quiet, fan is set at 40% and it nedvihlo even under load, better cooling and RAM on the graphics card I had used it on the GTX 260, which did not fit recesses on the screw, but smaller adjustments will hold and cooler.
Dušan, Pezinok 23/09/2013
Translated by Google Translate

I Menil cooler on ATI Radeon 4870-512 MB RAM from Gainward, the povodny already started to tingle and vrcali nom bearings, so no silence was held. After I found the long sought this from arctic cooling, and since I have yet to cpu cooler, and from them I have told you of this with them, I'm feeling. While cost is large (such 30 EUR would pristalo more) but also the cooler it is large enough. Can uchladic approx. 200 Watt, who at that tab 150 Watt sufficient. Options are a great shoulder, just put down povodny cooler and set himself up without any problems, I am also new and also used for liabilities that were to him delivery. You get 2 tubes in one's glue and the second teplov.pasta. These should be applied onto a scramble and after 5 hours uz liabilities were kept at ease. Cooler is quiet and runs on about me. 1500 - 1600 rpm. I am surprised with how to prove Atina cool in idle mam about 40 degrees, and when you play max. 60 is a quality processed and it can be attached to the models vela card ATI (AMD) and NVIDIA. Vid. products webpage. I am with them spokojny.
quiet and efficient cooling is sufficient for hi-end cards to 200 watt. runs at 1500-1600 rpm => silence in idle 40 degrees and the raids max. 60 nothing
Michal, Bratislava 06/04/2013
Translated by Google Translate

Tiche the executive easy assembly contains all the necessary accessories decent price Adhesive for bonding passivation RAM and VRM, rather I use thermal double sided tape, for convenience in subsequent disassembly
Customer 30/11/2013
Translated by Google Translate

Very good product when you already have to be addressed to cool the graphics card.
Even in spite of some evil place reviews a product actually advised even a very hot "želiezkom" in the form of graphics card Radeon HD4870 Toxic. Temperatures before making a purchase max. 80 ° C now max. 50 ° C. Price could be a little more pleasant.
syncek5 25/01/2014
Translated by Google Translate

New adhesive liabilities stuck for a while, glue hardens 1hr., Then placed the card to manipulate. Change - the original cooling after 5 years of use in load uchladilo card 81 st. and this cooler with paste MX2 max. 48 st. ;-)
Well chilled Not suitable for all liabilities ATI4850 (ASUS) - need a little bit to adjust dimensions
Jiří, Havlíčkův Brod 26/04/2015
Translated by Google Translate

After installation went temperature nearly 20 degrees down Size relatively noisy (because now I exit nepřeměření case ...)
Milan, Pelhřimov 27/10/2014
Translated by Google Translate

Performance after installation matches the description from the manufacturer. Suitable supplement PC with Noctua fans. nothing
Radoslav, kosice 16/03/2014
Translated by Google Translate

Powerful, quiet, easy assembly While none
Review ARCTIC Accelero Mono PLUS
Help others choose the best products...
Write a review
For shipping to other EU countries visit this page ARCTIC Accelero Mono PLUS. Für Versand nach Deutschland, besuchen Sie bitte ARCTIC Accelero Mono PLUS. Chcete doručit zboží do Česka? Prohlédněte si ARCTIC Accelero Mono PLUS. Chcete doručiť tovar na Slovensko? Prezrite si ARCTIC Accelero Mono PLUS. Für Versand nach Österreich, besuchen Sie bitte ARCTIC Accelero Mono PLUS. Magyarországra történő kiszállításért tekintse meg ezt a termékoldalt: ARCTIC Accelero Mono PLUS.

Link to Manufacturer's Website: Enter link to the external review

Note (link, Part number etc.):

My Alza Log In Shipping & Payment About Us
Shipping to:

Why buy from us? We have 24 years' experience More info »
Your personal assistant
Alza Premium
Rád pro vás zjistím stav objednávky či pomohu s výběrem zboží.
Napsat dotaz
Zavolejte mi
New conversation
We will call you and advise you professionally
+420 225 340 120
Order inquiry
Question about the product
Please enter your telephone:
Call me